Cylindrical Roller Bearings
Cylindrical roller bearings are available in a wide range of designs, series, variants and sizes. The main design differences are the number of roller rows and the inner/outer ring flanges as well as cage designs and materials.
The bearings can meet the challenges of applications faced with heavy radial loads and high speeds. Accommodating axial displacement (except for bearings with flanges on both the inner and outer rings), they offer high stiffness, low friction and long service life.
Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.
- 320 mm x 400 mm x 38 mm TIMKEN NCF1864V Cylindrical Roller Bearings
- 212
- Standard Duty
- 260 mm x 320 mm x 28 mm TIMKEN NCF1852V Cylindrical Roller Bearings
- Normal Duty
- 8865590390762
- 220 mm x 270 mm x 24 mm TIMKEN NCF1844V Cylindrical Roller Bearings
- 220 mm x 270 mm x 24 mm
- 600 mm x 730 mm x 60 mm TIMKEN NCF18/600V Cylindrical Roller Bearings
- Maximum of +120
- 450000 N
- 530 mm x 650 mm x 56 mm TIMKEN NCF18/530V Cylindrical Roller Bearings
- Four-Bolt Flange
- Cast Iron - Teflon P
- 85 mm x 150 mm x 36 mm SKF NU 2217 ECML Cylindrical Roller Bearings
- 120° to 248°
- Round