| No. | Brand | D | s | G | T | l | w | a | L |
| CF10-1UUM | IKO | - | - | M 80 | - | - | 90 mm | - | - |
| CF10-1B | IKO | 160 mm | - | - | - | - | - | - | - |
| CF10-1VR | IKO | 4mm | - | - | - | - | - | - | - |
| NUKR 40 A | SKF | - | - | - | - | - | - | - | - |
| CF10BR | IKO | - | - | - | - | - | - | - | - |
| KRV22-PP-X | INA | 400mm | - | - | - | - | - | - | - |
| CFES16UUR | IKO | - | - | M 160x3 | - | - | - | - | - |
| NUKR 80 A | SKF | 140.0000 mm | - | - | - | - | - | - | - |
| KRE47-PP | INA | - | - | - | - | - | - | - | - |
| CF5BUUR | IKO | 260mm | - | - | - | - | - | - | - |
| CF10-1UUR | IKO | 130mm | - | - | - | - | - | - | - |
| KRE16-PP | INA | 120.0000 mm | - | - | - | - | - | - | - |
| KR 40 PPXA | SKF | 52.0000 mm | - | - | - | - | - | - | - |
| NUKR 90 XA | SKF | 1150 mm | - | - | - | - | - | - | - |
| KRV16-PP | INA | - | - | - | - | - | - | - | - |
| KR 40 B | SKF | - | - | - | - | - | - | - | - |
| CF10VBUURM | IKO | 410.0000 mm | - | - | - | - | - | - | - |
| NUKRE 80 A | SKF | 440.0000 mm | - | - | - | - | - | - | - |
| CF10UUM | IKO | - | - | 179.476 mm | - | - | - | - | - |
| KRVE 35 PPA | SKF | 72.0000 mm | - | - | - | - | - | - | - |
| CF10-1BRM | IKO | 125mm | - | - | - | - | - | - | - |
| CF10-1R | IKO | - | - | - | - | - | - | - | - |
| CF10VR | IKO | - | - | - | - | - | - | - | - |
| KR35 | INA | 300.0000 mm | - | - | - | - | - | - | - |
| IKO CF10BRM Cam Follower and Track Roller - Stud Type | Tolerance shaft:e7; α:124 °; B:100 mm; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; Tolerance housing:H7; Coefficient of friction µ max.:0.15; D:180 mm; |
| IKO CF12-1UU Cam Follower and Track Roller - Stud Type | Availability:In Stock; Weight:66.90 KGS; Grease Limiting Speed (r/min):670; d:240mm; Cage Type:Steel; SKU:23148cke4-nsk; Clearance:Standard; Dynamic Load Rating (kN):1790; Seals or Shields:Open Type; D:400mm; |
| INA KRE32-PP Cam Follower and Track Roller - Stud Type | d:90mm; Cage Type:Steel; Weight:2.18 KGS; B:30mm; Dynamic Load Rating (kN):96; Seals or Shields:Two Rubber Seals; Availability:In Stock; Static Load Rating (kN):71.5; Clearance:Standard; Grease Limiting Speed (r/min):2600; |
| 18 mm x 40 mm x 58 mm SKF NUKR 40 A Cam Follower and Track Roller - Stud Type | da:35 mm; Grub screws:3 x M 6; B:65 mm; H1:60 mm; P120°:95 kN; Calculation factor e:0.31; ba max.:43 mm; Tightening torque for attachment bolts:80 N·m; A5:22 mm; A3:50 mm; Size (mm):18 mm x 40 mm x 58 mm ; |
| 24 mm x 62 mm x 80 mm SKF KRV 62 PPA Cam Follower and Track Roller - Stud Type | Availability:In Stock; D:13mm; Oil Limiting Speed (r/min):48000; B:5mm; Static Load Rating (kN):0.485; Clearance:Standard; Cage Type:Steel; Weight:0.00 KGS; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):1.3; Size (mm):24 mm x 62 mm x 80 mm ; |
| IKO CF 12-1 WBUUR Cam Follower and Track Roller - Stud Type | d:120mm; Static Load Rating (kN):64; D:180mm; B:19mm; Weight:1.55 KGS; Seals or Shields:Open Type; Cage Type:Steel; Fatigue Load Rating (kN):2.2; Availability:In Stock; Limiting Speed Rating (r/min):4800; |
| INA KRV22-PP-X Cam Follower and Track Roller - Stud Type | Static Load Rating (kN):3800; Clearance:Standard; d:240mm; SKU:24148came4-nsk; Seals or Shields:Open Type; Availability:In Stock; Grease Limiting Speed (r/min):670; Oil Limiting Speed (r/min):850; D:400mm; B:160mm; |
| INA KR26-X Cam Follower and Track Roller - Stud Type | Clearance:Standard; Seals or Shields:Open Type; Cage Type:Brass; Weight:0.02 KGS; d:240mm; SKU:23048-k-mb-qbl; Availability:In Stock; D:360mm; B:92mm; |
| 20 mm x 47 mm x 66 mm SKF NUKR 47 XA Cam Follower and Track Roller - Stud Type | Cap bolt:1 1/4-7 UNC; ba:89.694 mm; da:227.012 mm; Pa:66.7 kN; Stabilizing ring:2 x A8897; H2:85.725 mm; Bearing:23048 CCK/W33; Labyrinth ring:2 x LOR 552; H:419.1 mm; Mass pillow block:251 kg; Size (mm):20 mm x 47 mm x 66 mm ; |
| IKO CF10UU Cam Follower and Track Roller - Stud Type | d:25 mm; r3,4 min.:0.6 mm; a:82 mm; Frictional moment:0.2 N·m; r1,2 min.:0.3 mm; Angle between holes in outer ring (Pitch) α:45 °; Fatigue load limit Pu:2.2 kN; d2:37.2 mm; Attainable speed:5600 r/min; H1:19 mm; |
IKO CF10VUURM Cam Follower and Track Roller - Stud Type Video