| AMI UCHPL204W Hanger Unit Bearings | r, r1,2 min.:0.3 mm; Mass inner ring:0.016 kg; d:20 mm; F:25 mm; B:12.5 mm; |
| AMI UCECH204TCMZ2 Hanger Unit Bearings | Fw:40 mm; Ew:47 mm; U:20 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 40x47x4; Basic dynamic load rating C:31.4 kN; Mass needle roller and cage assembly:0.042 kg; Limiting speed:11000 r/min; Basic static load rating C0:57 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 40x47x4; Fatigue load limit Pu:6.95 kN; |
| AMI UCHPL205MZ2RFB Hanger Unit Bearings | Calculation factor e:1.14; Calculation factor Y0:0.52; rb max.:0.6 mm; D2 ≈:41.55 mm; Basic dynamic load rating C:17.4 kN; D:52 mm; d1 ≈:33.15 mm; a:22.8 mm; Da max.:45 mm; d:20 mm; |
| AMI UCHPL207MZ2RFCB Hanger Unit Bearings | ra max.:5 mm; Calculation factor Y0:0.8; Limiting speed:2200 r/min; Cb min.:30 mm; Db min.:280 mm; d1 ≈:220.275 mm; r1,2 min.:5 mm; C:110 mm; Basic dynamic load rating C:1264 kN; b:7.5 mm; |
| AMI UCHPL205-14W Hanger Unit Bearings | L:387.35 mm; P180°:48.9 kN; J min.:295.275 mm; ba:46.831 mm; Taconite seal:TER 112; Initial grease fill:181.44 g; P150°:40 kN; Bearing:23024 CCK/W33; RG:3/8 NPT; N1:22.225 mm; |
| AMI UCHPL201-8MZ2RFB Hanger Unit Bearings | J max.:282.575 mm; da:88.9 mm; L:330.2 mm; J min.:234.95 mm; A1:107.156 mm; B:102.394 mm; Mass bearing unit:14.3 kg; Limiting speed:2300 r/min; A:80.963 mm; s:40.084 mm; |
| AMI UCHPL207-22MZ2CW Hanger Unit Bearings | D:200.0000 mm; Basic Static Radial Load Rating Co:300000 N; d:95.000 mm; Oil Speed Rating n2:3000 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2000 rpm; B:90.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:276000 N; |
| AMI UCHPL201-8MZ2RFCEW Hanger Unit Bearings | P150°:48 kN; P60°:141 kN; H2:41.275 mm; J min.:263.525 mm; Cap bolt recommended tightening torque:149.1 N·m; da:80.963 mm; Initial grease fill:141.75 g; A1:98.425 mm; Adapter sleeve assembly:SNW 18x3.3/16; Pa:10.9 kN; |
| AMI UCHPL207-21W Hanger Unit Bearings | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Grease Speed Rating n1:3400 rpm; Accessories:Two Shields; D:130.0000 mm; Basic Static Radial Load Rating Co:143000 N; B:54.00 mm; Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:134000 N; d:60.000 mm; |
| AMI UCHPL206MZ2RFCB Hanger Unit Bearings | D1 ≈:389 mm; K:12 mm; Calculation factor Y0:2.2; Calculation factor e:0.31; D:460 mm; Basic static load rating C0:3450 kN; Reference speed:1000 r/min; r1,2 min.:5 mm; Da max.:440 mm; Fatigue load limit Pu:260 kN; |