| AMI UCHPL203MZ2RFW Hanger Unit Bearings | B:11 mm; d1:247 mm; d:200 mm; Mass shaft washer:1.51 kg; r1,2 min.:1.1 mm; |
| AMI UCECH211-32TC Hanger Unit Bearings | B:192 mm; Static (Cor):22.3 mm; with tapered bore:700 min-1; d:360 mm; with cylindrical bore:560 min-1; D:600 mm; rs (min):5 mm; Oil:571.310 kN; Grease:7500 kN; Dynamic (Cr):12 mm; |
| AMI UCHPL206-20W Hanger Unit Bearings | D:135 mm; B:7 mm; r1,2 min.:1 mm; D1:102 mm; Mass housing washer:0.35 kg; |
| AMI UCHPL204MZ2RFCEW Hanger Unit Bearings | Calculation factor f:1.12; Da max.:104 mm; Calculation factor f2A:1; d1:82.3 mm; Static axial stiffness, preload class D:227 N/µm; Basic static load rating C0:45.5 kN; Ball diameter Dw:12.7 mm; da min.:76 mm; D1:97.7 mm; Static axial stiffness, preload class C:156 N/µm; |
| AMI UCHPL206-20MZ2RFCB Hanger Unit Bearings | Bearing:22326 CCK/W33; S:4.763 mm; P150°:78.3 kN; Initial grease fill:793.8 g; Appropriate attachment bolt size G:1 in; P180°:94.3 kN; Pa:36.3 kN; P90°:136 kN; R1:104.775 mm; Max. speed for PosiTrac Plus seal:1300 r/min; |
| AMI UCHPL206-18MZ2RFCEW Hanger Unit Bearings | Basic Static Radial Load Rating Co:4000 N; Fillet Radius ra:1.00 mm; D:52.0000 mm; Grease Speed Rating n1:12000 rpm; Oil Speed Rating n2:15000 rpm; Basic Dynamic Radial Load Rating C:14300 N; B:15.00 mm; d:20.000 mm; |
| AMI UCHPL207-22W Hanger Unit Bearings | Oil Speed Rating n2:9000 rpm; D:240.0000 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:6000 rpm; B:50.00 mm; d:110.000 mm; Basic Static Radial Load Rating Co:255000 N; Basic Dynamic Radial Load Rating C:255000 N; Fillet Radius rb:1.00 mm; |
| AMI UCHPL205-16MZ2RFB Hanger Unit Bearings | Mass angle ring:0.97 kg; B2:18 mm; d:140 mm; d1 ≈:179.6 mm; B1:11 mm; r3,4 min.:3 mm; |
| AMI UCHPL204-12MZ2RFCEW Hanger Unit Bearings | Calculation factor Y1:1.6; Da max.:382.5 mm; Basic dynamic load rating C:1816 kN; Calculation factor Y0:1.6; rc max.:1.5 mm; Fatigue load limit Pu:255 kN; r5 min.:1.5 mm; da max.:259 mm; r3,4 min.:4 mm; 2B:130 mm; |
| AMI UCHPL206-18MZ2RFCB Hanger Unit Bearings | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Appropriate attachment bolt, size G:36 mm; Adapter sleeve:OH 3172 H; J:840 mm; s:30 mm; N:50 mm; Da:600 mm; N4 max.:30 mm; ba min.:176 mm; Q150°:2400 kN; |