| AMI UCHPL203-11W Hanger Unit Bearings | Dimension N:0.4063 in; Insert Bearing IB:Stainless Steel; Pin Dia BS:1/2; Dimension B:6.1875 in; Dimension L:3.8125 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension S1:1.0000 in; Shaft Diameter D:1 1/4 in; Dimension F:0.5625 in; Distance H:1.250 in; |
| AMI UCHPL207MZ2RFCEB Hanger Unit Bearings | A3:3.2 mm; s1:34.9 mm; d:38.1 mm; Recommended tightening torque for grub screw:16.5 N·m; Housing material:Cast iron; RG:1/4-28 UNF; Basic dynamic load rating C:30.7 kN; Basic static load rating C0:19 kN; Recommended diameter for attachment bolts, mm G:12 mm; A1:14 mm; |
| AMI UCHPL206-20MZ2RFCB Hanger Unit Bearings | Bearing:22326 CCK/W33; S:4.763 mm; P150°:78.3 kN; Initial grease fill:793.8 g; Appropriate attachment bolt size G:1 in; P180°:94.3 kN; Pa:36.3 kN; P90°:136 kN; R1:104.775 mm; Max. speed for PosiTrac Plus seal:1300 r/min; |
| AMI UCHPL204MZ2RFCB Hanger Unit Bearings | r1,2 min.:3 mm; Da max.:369 mm; d:320 mm; Mass bearing (including seat washer where applicable):45 kg; Limiting speed:850 r/min; da min.:391 mm; d1 ≈:435 mm; Minimum load factor A:47; Basic dynamic load rating C:572 kN; D:440 mm; |
| AMI UCHPL205MZ2RFW Hanger Unit Bearings | with cylindrical bore:600 min-1; Pu:2700 kN; with tapered bore:710 min-1; B:174 mm; Grease:4430 kN; Static (Cor):22.3 mm; Oil:364.860 kN; D:480 mm; rs (min):5 mm; Dynamic (Cr):12 mm; |
| AMI UCECH205TCMZ2 Hanger Unit Bearings | d:160 mm; B4:30.15 mm; Lock washer:W 32; Threads per inch:8; Mass adapter sleeve assembly:7.05 kg; G:159.614 mm; B1:116.027 mm; d1:146.05 mm; B:26.441 mm; Lock nut:AN 32; |
| AMI UCHPL206-20MZ2RFB Hanger Unit Bearings | Initial grease fill:623.7 g; P180°:96.1 kN; A1:158.75 mm; Da:259.999 mm; End plug (suffix Y):EPR 14; S:4.763 mm; P150°:80.1 kN; Pa:30.9 kN; J max.:463.55 mm; Eye bolt:2 x 3/8-16 UNC; |
| AMI UCHPL204-12W Hanger Unit Bearings | Fillet Radius ra:1.00 mm; d:30.000 mm; B:20.00 mm; Basic Static Radial Load Rating Co:4650 N; D:62.0000 mm; Basic Dynamic Radial Load Rating C:15600 N; Grease Speed Rating n1:7500 rpm; |
| AMI UCHPL207MZ2RFB Hanger Unit Bearings | Max. speed for Taconite seal:520 r/min; R1:87.313 mm; Cap bolt, SAE grade:8; ba:64.294 mm; P120°:116 kN; N1:28.575 mm; Adapter sleeve assembly:SNW 3034x5.7/8; P150°:105 kN; J min.:406.4 mm; End plug (suffix Y):EPR 18; |
| AMI UCHPL205W Hanger Unit Bearings | L:869.95 mm; Ca:147.803 mm; Housing:SSAFS 640; Cap bolt recommended tightening torque:4284.4 N·m; End plug (suffix Y):EPR 21; h:87.313 mm; da:182.563 mm; RG:1 NPT; R2:50.8 mm; PG:1/4 NPT; |