| AMI UCECH207-21TCMZ2 Hanger Unit Bearings | Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; D:210.0000 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:174000 N; Fillet Radius ra:3.00 mm; B:52.00 mm; Basic Static Radial Load Rating Co:137000 N; d:85.000 mm; |
| AMI UCHPL207-23W Hanger Unit Bearings | Mass plain bearing:4.1 kg; Basic static load rating C0:2450 kN; Da min.:112.9 mm; Specific dynamic load factor K:150 N/mm²; Design (sliding contact surface combination):Steel/steel; Lubricant:Maintenance free &nd; rb max.:1 mm; Da max.:123.5 mm; Basic dynamic load rating C:735 kN; ra max.:1 mm; |
| AMI UCHPL207-22W Hanger Unit Bearings | Oil Speed Rating n2:9000 rpm; D:240.0000 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:6000 rpm; B:50.00 mm; d:110.000 mm; Basic Static Radial Load Rating Co:255000 N; Basic Dynamic Radial Load Rating C:255000 N; Fillet Radius rb:1.00 mm; |
| AMI UCECH204TCMZ2 Hanger Unit Bearings | Fw:40 mm; Ew:47 mm; U:20 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 40x47x4; Basic dynamic load rating C:31.4 kN; Mass needle roller and cage assembly:0.042 kg; Limiting speed:11000 r/min; Basic static load rating C0:57 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 40x47x4; Fatigue load limit Pu:6.95 kN; |
| AMI UCHPL204MZ2RFCEW Hanger Unit Bearings | Calculation factor f:1.12; Da max.:104 mm; Calculation factor f2A:1; d1:82.3 mm; Static axial stiffness, preload class D:227 N/µm; Basic static load rating C0:45.5 kN; Ball diameter Dw:12.7 mm; da min.:76 mm; D1:97.7 mm; Static axial stiffness, preload class C:156 N/µm; |
| AMI UCHPL205-14W Hanger Unit Bearings | L:387.35 mm; P180°:48.9 kN; J min.:295.275 mm; ba:46.831 mm; Taconite seal:TER 112; Initial grease fill:181.44 g; P150°:40 kN; Bearing:23024 CCK/W33; RG:3/8 NPT; N1:22.225 mm; |
| AMI UCHPL207-20MZ2RFCB Hanger Unit Bearings | Mass needle roller:0.76 g; r2 max.:0.8 mm; Lw:19.8 mm; r1 max.:0.6 mm; Dw:2.5 mm; r1,2 min.:0.2 mm; |
| AMI UCHPL202MZ2RFW Hanger Unit Bearings | Basic Interchange NDH:88009; Fillet Radius ra:0.64 mm; Width - Inner Ring B1:16.40 mm; Basic Interchange FAF:-; Basic Interchange BCA:-; Width - Outer Ring B0:9.0 mm; Basic Radial Load Rating-Dynamic DC:4620 N; D:30.0000 mm; Old MRC Bearing Number:-; Accessories:88000 Two Seals; |
| AMI UCHPL206-18W Hanger Unit Bearings | Bearing:23032 CCK/W33; RG:1/2 NPT; PG:1/4 NPT; H2:60.325 mm; Housing:SAF 032 KA; R2:36.513 mm; ba:59.531 mm; P120°:73.8 kN; Ca:89.789 mm; Pa:25.4 kN; |
| AMI UEECH207-20TCMZ20 Hanger Unit Bearings | D:200.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:1600 rpm; Oil Speed Rating n2:2600 rpm; Grease Speed Rating n1:1600 rpm; Basic Dynamic Radial Load Rating C:203000 N; Basic Static Radial Load Rating Co:200000 N; B:69.80 mm; Accessories:Two Seals; d:110.000 mm; |