| AMI UCHPL205MZ2RFB Hanger Unit Bearings | Calculation factor e:1.14; Calculation factor Y0:0.52; rb max.:0.6 mm; D2 ≈:41.55 mm; Basic dynamic load rating C:17.4 kN; D:52 mm; d1 ≈:33.15 mm; a:22.8 mm; Da max.:45 mm; d:20 mm; |
| AMI UCHPL206-18MZ2RFB Hanger Unit Bearings | Fillet Radius ra:0.64 mm; d:15.000 mm; Basic Static Radial Load Rating Co:5100 N; D:35.0000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating n1:19000 rpm; Fillet Radius rb:0.30 mm; B:11.00 mm; Basic Dynamic Radial Load Rating C:9750 N; |
| AMI UCECH202-10TCMZ2 Hanger Unit Bearings | Accessories:Two Seals; B:16.00 mm; d:30.000 mm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:11200 N; Basic Dynamic Radial Load Rating C:19500 N; Sealed Speed Rating n3:7500 rpm; |
| AMI UCHPL206-17W Hanger Unit Bearings | Basic Dynamic Radial Load Rating C:78100 N; d:60.000 mm; Sealed Speed Rating n3:4300 rpm; Grease Speed Rating n1:3800 rpm; Accessories:Two Shields & Snap-R; B:38.10 mm; Basic Static Radial Load Rating Co:88000 N; D:110.0000 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:1.50 mm; |
| AMI UCHPL207-20MZ2RFCB Hanger Unit Bearings | Mass needle roller:0.76 g; r2 max.:0.8 mm; Lw:19.8 mm; r1 max.:0.6 mm; Dw:2.5 mm; r1,2 min.:0.2 mm; |
| AMI UCHPL204MZ2RFCB Hanger Unit Bearings | r1,2 min.:3 mm; Da max.:369 mm; d:320 mm; Mass bearing (including seat washer where applicable):45 kg; Limiting speed:850 r/min; da min.:391 mm; d1 ≈:435 mm; Minimum load factor A:47; Basic dynamic load rating C:572 kN; D:440 mm; |
| AMI UCHPL206-18W Hanger Unit Bearings | Bearing:23032 CCK/W33; RG:1/2 NPT; PG:1/4 NPT; H2:60.325 mm; Housing:SAF 032 KA; R2:36.513 mm; ba:59.531 mm; P120°:73.8 kN; Ca:89.789 mm; Pa:25.4 kN; |
| AMI UCHPL207MZ2RFCW Hanger Unit Bearings | A1:190.5 mm; h:61.913 mm; R1:120.65 mm; N1:34.925 mm; L:711.2 mm; Ca:101.803 mm; Stabilizing ring:SR-38-32; Cap bolt, SAE grade:5; H:401.637 mm; R2:42.069 mm; |
| AMI UCHPL205-15W Hanger Unit Bearings | B:6 mm; Permissible sliding velocity v min.:0.25 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; d:8 mm; Tolerance housing:H7; Mass bushing:0.002 kg; |
| AMI UCHPL206-18MZ2RFCB Hanger Unit Bearings | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Appropriate attachment bolt, size G:36 mm; Adapter sleeve:OH 3172 H; J:840 mm; s:30 mm; N:50 mm; Da:600 mm; N4 max.:30 mm; ba min.:176 mm; Q150°:2400 kN; |