| AMI UCHPL207-22MZ2CW Hanger Unit Bearings | D:200.0000 mm; Basic Static Radial Load Rating Co:300000 N; d:95.000 mm; Oil Speed Rating n2:3000 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2000 rpm; B:90.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:276000 N; |
| AMI UCHPL207-20W Hanger Unit Bearings | A2:193.675 mm; H1:82.55 mm; Stabilizing ring:SR-15-0; Cap bolt, SAE grade:5; R2:21.431 mm; L:285.75 mm; Housing:FSAF 515; J min.:219.075 mm; Adapter sleeve assembly:SNW 15x2.3/8; P120°:20 kN; |
| AMI UCECH206-17TCMZ2 Hanger Unit Bearings | with tapered bore:500 min-1; B:224 mm; Oil:572.330 kN; D:620 mm; Pu:4430 kN; with cylindrical bore:420 min-1; Static (Cor):22.3 mm; Grease:7560 kN; Dynamic (Cr):12 mm; d:340 mm; |
| AMI UCECH204TCMZ2 Hanger Unit Bearings | Fw:40 mm; Ew:47 mm; U:20 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 40x47x4; Basic dynamic load rating C:31.4 kN; Mass needle roller and cage assembly:0.042 kg; Limiting speed:11000 r/min; Basic static load rating C0:57 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 40x47x4; Fatigue load limit Pu:6.95 kN; |
| AMI UCHPL202MZ2RFW Hanger Unit Bearings | Basic Interchange NDH:88009; Fillet Radius ra:0.64 mm; Width - Inner Ring B1:16.40 mm; Basic Interchange FAF:-; Basic Interchange BCA:-; Width - Outer Ring B0:9.0 mm; Basic Radial Load Rating-Dynamic DC:4620 N; D:30.0000 mm; Old MRC Bearing Number:-; Accessories:88000 Two Seals; |
| AMI UCHPL207-20MZ2RFB Hanger Unit Bearings | da max.:400 mm; F:405 mm; Fatigue load limit Pu:600 kN; r1,2 min.:7.5 mm; Limiting speed:1500 r/min; Axial load factor Y:0.4; Basic dynamic load rating C:4730 kN; D1 ≈:565 mm; Mass bearing:369 kg; ra max.:6 mm; |
| AMI UCHPL206-20MZ2RFB Hanger Unit Bearings | Initial grease fill:623.7 g; P180°:96.1 kN; A1:158.75 mm; Da:259.999 mm; End plug (suffix Y):EPR 14; S:4.763 mm; P150°:80.1 kN; Pa:30.9 kN; J max.:463.55 mm; Eye bolt:2 x 3/8-16 UNC; |
| AMI UCECH206-18TCMZ2 Hanger Unit Bearings | Misalignment factor k1:0; Mass bearing:3510 kg; Limiting speed:150 r/min; Da max.:2146 mm; r1,2 min.:9.5 mm; Da min.:2008 mm; Fatigue load limit Pu:3000 kN; Ca min.:8.4 mm; B:355 mm; da min.:1734 mm; |
| AMI UCHPL206-20W Hanger Unit Bearings | D:135 mm; B:7 mm; r1,2 min.:1 mm; D1:102 mm; Mass housing washer:0.35 kg; |
| AMI UCHPL202W Hanger Unit Bearings | Effective load carrying cross section A:33660 mm²; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.03; Mass bushing:2.11 kg; B:200 mm; D:190 mm; Tolerance housing:H7; d:170 mm; Tolerance shaft:h8; Specific dynamic load factor K:140 N/mm²; |