| AMI UCHPL206-20MZ2RFCB Hanger Unit Bearings | Bearing:22326 CCK/W33; S:4.763 mm; P150°:78.3 kN; Initial grease fill:793.8 g; Appropriate attachment bolt size G:1 in; P180°:94.3 kN; Pa:36.3 kN; P90°:136 kN; R1:104.775 mm; Max. speed for PosiTrac Plus seal:1300 r/min; |
| AMI UCHPL203MZ2RFW Hanger Unit Bearings | B:11 mm; d1:247 mm; d:200 mm; Mass shaft washer:1.51 kg; r1,2 min.:1.1 mm; |
| AMI UCHPL205-16MZ2RFCB Hanger Unit Bearings | Specific dynamic load factor K:100 N/mm²; B:40 mm; α:17 °; da max.:44.7 mm; dk:60 mm; M:3 mm; D:68 mm; Da max.:63.6 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Sealing solution:Triple-lip seals; |
| AMI UCHPL207-23MZ2RFCB Hanger Unit Bearings | B:170.00 mm; Grease Speed Rating n1:880 rpm; Fillet Radius ra:4.00 mm; d:300.000 mm; Oil Speed Rating n2:1000 rpm; Basic Dynamic Radial Load Rating C:1140000 N; D:540.0000 mm; Fillet Radius rb:1.50 mm; Basic Static Radial Load Rating Co:2400000 N; |
| AMI UCHPL201-8MZ2RFB Hanger Unit Bearings | J max.:282.575 mm; da:88.9 mm; L:330.2 mm; J min.:234.95 mm; A1:107.156 mm; B:102.394 mm; Mass bearing unit:14.3 kg; Limiting speed:2300 r/min; A:80.963 mm; s:40.084 mm; |
| AMI UCECH205TCMZ2 Hanger Unit Bearings | d:160 mm; B4:30.15 mm; Lock washer:W 32; Threads per inch:8; Mass adapter sleeve assembly:7.05 kg; G:159.614 mm; B1:116.027 mm; d1:146.05 mm; B:26.441 mm; Lock nut:AN 32; |
| AMI UCHPL206-19W Hanger Unit Bearings | d2 ≈:226 mm; Reference speed:1000 r/min; r1,2 min.:3 mm; D:340 mm; Basic dynamic load rating C:1865 kN; Calculation factor Y1:1.7; Basic static load rating C0:2800 kN; Mass bearing:51.5 kg; D1 ≈:284 mm; Calculation factor Y0:1.6; |
| AMI UCHPL207-23W Hanger Unit Bearings | Mass plain bearing:4.1 kg; Basic static load rating C0:2450 kN; Da min.:112.9 mm; Specific dynamic load factor K:150 N/mm²; Design (sliding contact surface combination):Steel/steel; Lubricant:Maintenance free &nd; rb max.:1 mm; Da max.:123.5 mm; Basic dynamic load rating C:735 kN; ra max.:1 mm; |
| AMI UCHPL201-8MZ2RFCEW Hanger Unit Bearings | P150°:48 kN; P60°:141 kN; H2:41.275 mm; J min.:263.525 mm; Cap bolt recommended tightening torque:149.1 N·m; da:80.963 mm; Initial grease fill:141.75 g; A1:98.425 mm; Adapter sleeve assembly:SNW 18x3.3/16; Pa:10.9 kN; |
| AMI UCHPL205-15W Hanger Unit Bearings | B:6 mm; Permissible sliding velocity v min.:0.25 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; d:8 mm; Tolerance housing:H7; Mass bushing:0.002 kg; |