| AMI UCHPL207-22MZ2RFB Hanger Unit Bearings | Accessories:No Shield, no Seal,; Basic Static Radial Load Rating Co:20400 N; Grease Speed Rating n1:7000 rpm; D:62.0000 mm; d:30.000 mm; B:23.80 mm; Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:9500 rpm; Basic Dynamic Radial Load Rating C:28600 N; |
| AMI UCHPL201-8MZ2RFCEW Hanger Unit Bearings | P150°:48 kN; P60°:141 kN; H2:41.275 mm; J min.:263.525 mm; Cap bolt recommended tightening torque:149.1 N·m; da:80.963 mm; Initial grease fill:141.75 g; A1:98.425 mm; Adapter sleeve assembly:SNW 18x3.3/16; Pa:10.9 kN; |
| AMI UCHPL204-12W Hanger Unit Bearings | Fillet Radius ra:1.00 mm; d:30.000 mm; B:20.00 mm; Basic Static Radial Load Rating Co:4650 N; D:62.0000 mm; Basic Dynamic Radial Load Rating C:15600 N; Grease Speed Rating n1:7500 rpm; |
| AMI UCHPL207-23MZ2RFCB Hanger Unit Bearings | B:170.00 mm; Grease Speed Rating n1:880 rpm; Fillet Radius ra:4.00 mm; d:300.000 mm; Oil Speed Rating n2:1000 rpm; Basic Dynamic Radial Load Rating C:1140000 N; D:540.0000 mm; Fillet Radius rb:1.50 mm; Basic Static Radial Load Rating Co:2400000 N; |
| AMI UCHPL207MZ2RFCW Hanger Unit Bearings | A1:190.5 mm; h:61.913 mm; R1:120.65 mm; N1:34.925 mm; L:711.2 mm; Ca:101.803 mm; Stabilizing ring:SR-38-32; Cap bolt, SAE grade:5; H:401.637 mm; R2:42.069 mm; |
| AMI UCHPL205-14MZ2RFCEW Hanger Unit Bearings | dk:118.745 mm; Lubricant:Regular relubricatio; C:61.9 mm; Basic dynamic load rating C:585 kN; Sealing solution:Triple-lip seals; b:9.3 mm; α:8 °; r1 min.:2 mm; Material constant KM:330; rb max.:1 mm; |
| AMI UCECH202-10TCMZ2 Hanger Unit Bearings | Accessories:Two Seals; B:16.00 mm; d:30.000 mm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:11200 N; Basic Dynamic Radial Load Rating C:19500 N; Sealed Speed Rating n3:7500 rpm; |
| AMI UCHPL205-16MZ2RFCB Hanger Unit Bearings | Specific dynamic load factor K:100 N/mm²; B:40 mm; α:17 °; da max.:44.7 mm; dk:60 mm; M:3 mm; D:68 mm; Da max.:63.6 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Sealing solution:Triple-lip seals; |
| AMI UCHPL204W Hanger Unit Bearings | r, r1,2 min.:0.3 mm; Mass inner ring:0.016 kg; d:20 mm; F:25 mm; B:12.5 mm; |
| AMI UCHPL204MZ2RFCB Hanger Unit Bearings | r1,2 min.:3 mm; Da max.:369 mm; d:320 mm; Mass bearing (including seat washer where applicable):45 kg; Limiting speed:850 r/min; da min.:391 mm; d1 ≈:435 mm; Minimum load factor A:47; Basic dynamic load rating C:572 kN; D:440 mm; |