| No. | Brand | M | A | w | L | T | G | N | U |
| 62.50.2490.001.49.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.3150.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.45.3400.100.19.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 25 0841 01 | Rollix | - | - | - | - | - | - | - | - |
| 3 0785 | Rollix | - | - | - | - | - | - | - | - |
| 39 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 39 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 7 077 | Rollix | - | - | - | - | - | - | - | - |
| 36 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 11.40.2619.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.45.2654.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.50.2446.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 27 0411 01 | Rollix | - | - | - | 349.25 mm | - | - | - | - |
| 34 0641 01 | Rollix | - | - | - | - | - | - | 32 mm | - |
| 161.40.2368.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 29 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 91.40.2395.990.11.1502 | Standard 5 | - | 89.694 mm | - | 361.95 mm | - | - | - | - |
| 6 0574 09 | Rollix | - | - | - | - | - | M 64x4 | - | - |
| 191.32.2500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 1 0555 01 | Rollix | - | - | - | - | - | - | - | - |
| 37 0541 01 | Rollix | - | - | - | - | 923.925 mm | - | - | - |
| 26 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 26 0741 01 Rollix Slewing Ring Bearings | Hole Diameter (do):15 mm; Radial Clearance:0.360 to 0.470 mm; Dynamic Load Rating:5,600,000 N; B:165 mm; Nr. of Holes:8; Retainer Material:Machined Brass; Weight:224.000 kg; Groove Width A:32 mm; Axial Load Factor Y1:2.49; Roller Profile:Symmetric; Configuration:Double Row; ra (max):5 mm; Limiting Speed - Oil:930 rpm; Center Guidance:Fixed Inner Ring Rib; Da (max):592 mm; Constant e:0.27; Axial Load Factor Y2:3.71; |
| 121.50.6700.990.41.1502 Standard 5 Slewing Ring Bearings | Enclosure:Open; Bore Type:Cylindrical Bore; ra1 (max):0.6 mm; Radial Clearance:0.035 to 0.060 mm; Dynamic Load Rating:35,000 N; r1:0.6 mm; dc (min):34 mm; Da (max):46 mm; Fillet Radius/Chamfer:1 mm; B:18 mm; db (min):30 mm; dd (min):37 mm; Limiting Speed - Oil:14,000 rpm; D:52 mm; db (max):31 mm; d:25 mm; Configuration:Single Row; Static Load Rating:34,500 N; Limiting Speed - Grease:12,000 rpm; Weight:0.185 kg; |
| 3 036 Rollix Slewing Ring Bearings | Snap Ring Outside Diameter:55.7 mm; Da (max):44 mm; Enclosure:Single Shield with S; ra (max):1 mm; D1 (max):47.6 mm; Weight:0.120 kg; Limiting Speed - Oil:17,000 rpm; Snap Ring Width:1.1 mm; d:22 mm; Static Load Rating:6,950 N; Radial Clearance:0.013 to 0.028 mm; Cy (max):3.3 mm; D:50 mm; Dx (min):56.5 mm; Bore Type:Cylindrical Bore; Limiting Speed - Grease:14,000 rpm; b (min):1.4 mm; Fillet Radius/Chamfer:1 mm; |
| 39 0411 01 Rollix Slewing Ring Bearings | ra (max):1 mm; Weight:2.860 kg; Configuration:Single Row; B:22 mm; Enclosure:Open; Factor fo:16.2; Fillet Radius/Chamfer:1.1 mm; Limiting Speed - Grease:3,000 rpm; Static Load Rating:62,000 N; Da (max):196 mm; Radial Clearance:0.041 to 0.081 mm; Dynamic Load Rating:56,000 N; Bore Type:Cylindrical Bore; d:140 mm; da (min):154 mm; D:210 mm; Limiting Speed - Oil:3,500 rpm; |
| 35 0411 01 Rollix Slewing Ring Bearings | B:118 mm; Axial Load Factor Y2:5.46; Nr. of Holes:8; Constant e:0.18; Limiting Speed - Oil:840 rpm; ra (max):3 mm; D:600 mm; Enclosure:Open; Weight:101.000 kg; Axial Load Factor Y1:3.66; Bore Type:Cylindrical Bore; Center Guidance:Fixed Inner Ring Rib; Configuration:Double Row; Retainer Material:Machined Brass; Limiting Speed - Grease:670 rpm; Hole Diameter (do):12 mm; d:440 mm; Da (max):582 mm; Dynamic Load Rating:3,100,000 N; |
| 11.40.2795.001.41.1502 Standard 5 Slewing Ring Bearings | Flinger Material:Steel; Shaft Attachment (2):D-Lock; Anti-Rotation Pin:Yes; Ship Weight:10 LB; Retainer Material:Nylon; Bearing Locking Device:Concentric Clamp Col; Bearing Outer Ring Material:Steel; Housing Material:Cast Iron; Base to Center Height:Not Applicable; Flinger Type:Rubberized; Max Bearing Speed:4500 rpm; Bearing Series:210 Series; Ball Material:Steel; Bearing Duty:Normal Duty; Ball Bearing Housing Series:210 Series; |
| 191.50.6300.990.41.1502 Standard 5 Slewing Ring Bearings | Snap Ring Outside Diameter:70.7 mm; Snap Ring Width:1.7 mm; da (min):38 mm; Factor fo:13.6; b (min):1.9 mm; d:32 mm; B:17 mm; D1 (max):62.6 mm; r1:0.5 mm; Dynamic Load Rating:22,400 N; ra (max):1 mm; Da (max):59 mm; a (max):3.3 mm; Static Load Rating:13,100 N; Enclosure:Single Shield with S; Weight:0.230 kg; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1 mm; D:65 mm; Radial Clearance:0.015 to 0.033 mm; |
| 92.50.2842.990.41.1502 Standard 5 Slewing Ring Bearings | Weight:0.125 kg; ra (max):0.6 mm; Da (max):68 mm; Factor fo:16.1; Enclosure:Open; Radial Clearance:0.018 to 0.036 mm; Bore Type:Cylindrical Bore; B:12 mm; Limiting Speed - Oil:11,000 rpm; Configuration:Single Row; d:50 mm; da (min):54 mm; Static Load Rating:11,700 N; Dynamic Load Rating:14,500 N; Fillet Radius/Chamfer:0.6 mm; D:72 mm; Limiting Speed - Grease:9,500 rpm; |
| 26 0541 01 Rollix Slewing Ring Bearings | dk:92 mm; l5 ≈:40 mm; d:70 mm; d4 ≈:92 mm; Material constant KM:330; h1:265 mm; Mass rod end:10.5 kg; Specific dynamic load factor K:100 N/mm²; r1 min.:1 mm; G:M 72x4; Basic dynamic load rating C:315 kN; α:6 °; l4 max.:349 mm; l7 min.:80 mm; Basic static load rating C0:530 kN; w:80 mm; C1 max.:43 mm; l3 min.:80 mm; d2 max.:162 mm; B:49 mm; |
| 192.50.6735.990.41.1502 Standard 5 Slewing Ring Bearings | d:80 mm; ra (max):2 mm; Fillet Radius/Chamfer:2.1 mm; db (max):99 mm; Static Load Rating:430,000 N; Dynamic Load Rating:355,000 N; Limiting Speed - Oil:4,000 rpm; db (min):92 mm; Bore Type:Cylindrical Bore; Radial Clearance:0.040 to 0.075 mm; Enclosure:Open; D:170 mm; Da (max):158 mm; dc (min):105 mm; dd (min):114 mm; B:58 mm; r1:2.1 mm; Limiting Speed - Grease:3,200 rpm; Inside Ring Outside Diameter:101 mm; |
| 12.40.3300.000.11.1502 Standard 5 Slewing Ring Bearings | Factor fo:13.2; Radial Clearance:0.025 to 0.051 mm; D:170 mm; B:39 mm; Fillet Radius/Chamfer:2.1 mm; Weight:3.590 kg; Bore Type:Cylindrical Bore; Enclosure:Double Shield; d:80 mm; Limiting Speed - Grease:4,000 rpm; Static Load Rating:86,500 N; Configuration:Single Row; ra (max):2 mm; Da (max):158 mm; da (min):92 mm; Dynamic Load Rating:123,000 N; |
| 11.35.2620.000.11.1503 Standard 5 Slewing Ring Bearings | Threads per inch:8; Sleeve:S 44x7.1/2; G:219.151 mm; Mass adapter sleeve assembly:14.5 kg; d1:190.5 mm; B:32.004 mm; d:220 mm; Hydraulic nut:HMVC 44E; B1:149.631 mm; B4:35.712 mm; d3 max.:279.527 mm; |
| 91.40.2395.990.11.1502 Standard 5 Slewing Ring Bearings | d2:152.4 mm; Limiting speed:2200 r/min; Basic dynamic load rating C:311 kN; B:116.681 mm; A:89.694 mm; J max.:311.15 mm; S:0.794 mm; A1:121.047 mm; H2:63.5 mm; J min.:254 mm; da:100.013 mm; s:41.275 mm; Mass bearing unit:19.7 kg; L:361.95 mm; Attachment bolt diameter G:25.4 mm; H1:104.775 mm; H:213.519 mm; |
| 7 0673 Rollix Slewing Ring Bearings | Calculation factor Y0:0.6; Calculation factor e:0.54; rb max.:1.5 mm; Da min.:67 mm; Da max.:82.5 mm; Cb min.:8 mm; Basic dynamic load rating C:134 kN; C:27 mm; Calculation factor Y:1.1; Ca min.:4 mm; Fatigue load limit Pu:16 kN; r1,2 min.:2 mm; B:33 mm; a:27.277 mm; Mass bearing:1.09 kg; Dimension series:5FD; d1 ≈:67.1 mm; r3,4 min.:1.5 mm; ra max.:2 mm; Db min.:84 mm; |
| 11.40.2915.000.11.1502 Standard 5 Slewing Ring Bearings | Roller Profile:Symmetric; Static Load Rating:1,510,000 N; Enclosure:Open; Configuration:Double Row; Retainer Material:Machined Brass; Bore Type:Tapered Bore; Center Guidance:Fixed Inner Ring Rib; B:86 mm; Dynamic Load Rating:1,390,000 N; Axial Load Factor Y2:3.47; Weight:30.000 kg; D:310 mm; ra (max):3 mm; Fillet Radius/Chamfer:4 mm; Limiting Speed - Grease:1,400 rpm; Groove Width A:18 mm; Radial Clearance:0.200 to 0.260 mm; |
| 2 0422 Rollix Slewing Ring Bearings | B:33 mm; G:M 170x3; d1:150 mm; B1:101 mm; Hydraulic nut:HMV 34 E; d:170 mm; d3:220 mm; Mass adapter sleeve assembly:5.9 kg; |
6 0508 Rollix Slewing Ring Bearings Video
Step 2: Determine ICT Exceptions |
6 Undue Burden or Fundamental Alteration Exception. Conformance to the Revised 508 Standards is required only when it does not impose an undue burden, or result ...
TM 0508 A/6 LUMBERG - Socket | DIN mini; female - .
Nov 2, 2020 — LUMBERG TM 0508 A/6 | Socket; DIN mini; female; PIN: 6; shielded; THT; on PCBs; angled 90° - This product is available in Transfer Multisort ...
625 ILCS 5/6-508 - Illinois General Assembly
Sec. 6-508. Commercial Driver's License (CDL) - qualification standards. (a) Testing.
Dexmedetomidine infusion as an analgesic adjuvant during ...
by K Bielka · 2018 · Cited by 36 — Median pain intensity did not differ between the groups 3, 6, ... BMC Anesthesiol 18, 44 (2018). https://doi.org/10.1186/s12871-018-0508-6.
Multiplexed genome engineering by Cas12a and CRISPR ...
by CC Campa · 2019 · Cited by 109 — 6: Multiplexed orthogonal gene editing and transcriptional ... Nat Methods 16, 887–893 (2019). https://doi.org/10.1038/s41592-019-0508-6.
Next Section (76-6-508) - Utah Legislature
76-6-508. Bribery of or receiving bribe by person in the business of selection, appraisal, or criticism of goods or services.
Cerenkov radiation and its applications - IOPscience
by JV Jelley · 1955 · Cited by 1153 — DOI. https://doi.org/10.1088/0508-3443/6/7/301 · Buy this article in print. 0508-3443/6/7/227 ... [(6)] Tamm Ig 1939 J. Phys. U.S.S.R. 1 439.